Tiefenfluorid ® 
two steps to success

The appropriate selection for all ages
j u n i o r – Classic – balance

Local fluoridation for cervical desensitization, for mineral fissure sealing, and caries prophylaxis, also after bracket bonding.


Tiefenfluorid ® j u n i o r

With fruity strawberry flavor.


Tiefenfluorid ®

The classic.
Also suitable for allergy sufferers.


Tiefenfluorid ® balance

Additional support for local paro treatments through pH stabilization.

Tiefenfluorid ® ju nio r

Local fluoridation for cervical desensitization, for mineral fissure sealing, and for caries prophylaxis, also after bracket bonding.
With fruity strawberry flavor.

Order here

Cervical desensitizationMineral fissure sealing (ZMK 1-2/1999)White spots disappear (ZMK 9/1995)Caries prophylaxis even in hard-to-reach areas

Application

For application, the tooth, ideally freed from plaque, is relatively dried and thoroughly dabbed with a cotton pellet or brush soaked in the dabbing solution. No intermediate rinsing!
Drying is not required.
Then, thoroughly dab with a second cotton pellet or brush using the corresponding, well-shaken post-dabbing solution.
Only then rinse with water!
No drying or curing – the patient may eat and drink immediately.
An invisible precipitate remains, not visible to the human eye.

Cervical desensitization:
Repeat the treatment 1 to 2 times every 8 – 14 days, then 1 to 2 times annually. For particularly sensitive tooth necks, it is recommended to start by dabbing with the post-dabbing solution. Subsequently, the dabbing solution and then again the post-dabbing solution are applied as described.

Fissure sealing:
After the usual pre-treatment of the fissure with a probe or an excavator, the dabbing is performed. Here too, repeat the treatment twice if possible, with an interval of 8 – 14 days, then repeat 2 times annually.

Caries prophylaxis:
Treat at least once annually; for bracket wearers, at least twice annually.


Indication / Intended Use

Local fluoridation for cervical desensitization, for mineral fissure sealing, and for caries prophylaxis, also after bracket bonding.

Ingredients

Application Solution: Magnesium hexafluorosilicate, Copper(II) hexafluorosilicate, Sodium fluoride (as stabilizer), Xylitol, Sucralose, natural strawberry flavor, Aqua dest.
Post-Application Solution: Highly dispersed calcium hydroxide, Methylcellulose, Aqua dest.

Frequently Asked Questions

Is the post-application solution available separately? Is the application solution available separately? My post-application solution has partially dried out; what can I do? How can I prevent the post-application solution from drying out? How do Dentin Sealing Liquid and Tiefenfluorid® junior differ? How do Tiefenfluorid® junior and the classic Tiefenfluorid® differ? Can Tiefenfluorid® junior also be used on adult patients?

Yes, as the post-application solution has a higher wetting capability, it is generally consumed more quickly and is therefore also offered in the 20 ml individual pack.

No, as the application solution is typically consumed less than the post-application solution, it is not available in an individual pack.

As long as it remains a liquid – meaning the liquid has not completely dried out – you may add a few drops of Aqua dest. (Ph. Eur.; pharmaceutical grade) to the bottle.

However, if the liquid has completely dried out, the post-application solution is no longer usable.

Important: Add only a few drops of Aqua dest. (Ph. Eur.; pharmaceutical grade), ensuring that a white, solid residue always remains in the bottle.

The application solution (blue cap) must under no circumstances be diluted with distilled water!

Keep the threads on the bottle neck and screw cap thoroughly clean and seal the bottle tightly.

For the 20 ml bottles, the use of the supplied dropper pipettes is recommended.

The application solution of Tiefenfluorid ® junior is optimized for application on tooth enamel, contains a high fluoride ion concentration, and consequently has a low, i.e., acidic, pH value.

The application solution of the Dentin Sealing Liquid is optimized for application within the cavity or on the crown stump.
To protect the pulp, the solution contains fewer fluoride ions (which are also only moderately effective due to limited saliva access).
Conversely, the copper doping is significantly increased.

The application solution of Tiefenfluorid ® junior contains Xylitol, Sucralose, and natural strawberry flavor, in addition to the ingredients of the classic Tiefenfluorid ® .

The fluoride concentration is identical.

The post-application solution is identical.

Yes, Tiefenfluorid ® junior can be applied to patients of all age groups.

For patients with an elevated allergy risk, the classic Tiefenfluorid ® without flavor additives should be preferred.

from 27.50 €

Trial pack 2 x 5 ml or
Economy pack 2 x 20 ml

  • Cervical Desensitization
  • Mineral Fissure Sealing (ZMK 1-2/1999)
  • White Spots Disappear (ZMK 9/1995)
  • Caries Prophylaxis, even in hard-to-reach areas
  • Fruity sweet taste, sugar-free
  • Your patient can eat and drink immediately!
Order now

Tiefenfluorid ®

Local fluoridation for cervical desensitization, mineral fissure sealing, and caries prophylaxis, including after bracket bonding.
Also suitable for patients with allergies.

Order here

Cervical desensitizationMineral fissure sealing (ZMK 1-2/1999)White spots disappear (ZMK 9/1995)Caries prophylaxis even in hard-to-reach areas

Application

For application, the tooth, ideally free of plaque, is relatively dried and thoroughly dabbed with a cotton pellet or brush soaked in the application solution. No intermediate rinsing!
Drying is not required.
Then, thoroughly dab with a second cotton pellet or brush using the accompanying, well-shaken post-application solution. Only rinse with water afterwards!
No drying or curing – the patient may eat and drink immediately.
An invisible precipitate remains, imperceptible to the human eye.

Cervical Desensitization:
Repeat the treatment 1 to 2 times every 8 – 14 days, then 1 to 2 times annually. For particularly sensitive dental necks, it is recommended to begin by dabbing with the post-application solution. Subsequently, the application solution and then the post-application solution are applied again, as described.

Fissure Sealing:
After the usual pre-treatment of the fissure with a probe or an excavator, the application is performed. Here too, repeat the treatment twice if possible, at an interval of 8 – 14 days, then repeat 2 times annually.

Caries Prophylaxis:
Treat at least once annually; for bracket wearers, treat at least twice annually.


Indication / Intended Use

Local fluoridation for cervical desensitization, for mineral fissure sealing, and for caries prophylaxis, also after bracket bonding.

Ingredients

Application Solution: Magnesium hexafluorosilicate, Copper(II) hexafluorosilicate, Sodium fluoride (as stabilizer), Distilled water.
Post-Application Solution: Highly dispersed calcium hydroxide, Methylcellulose, Distilled water.

Application example:

For application, the tooth, ideally free of plaque, is relatively dried and thoroughly dabbed with a cotton pellet or brush soaked in the application solution.


No intermediate rinsing!


Drying is not required.


Then, thoroughly dab with a second cotton pellet or brush using the accompanying, well-shaken post-application solution.



Only rinse with water afterwards!




No drying or curing – the patient may eat and drink immediately. An invisible precipitate remains, imperceptible to the human eye.

Frequently Asked Questions

Is the post-application solution available for individual purchase? Is the application solution available for individual purchase? My post-application solution has dried out a bit; what can I do? How can I prevent the post-application solution from drying out? How do Dentin Sealing Liquid and Tiefenfluorid® differ? Can I also use Tiefenfluorid® on young patients?

Yes, as the post-application solution has a stronger wetting effect, it generally depletes faster and is therefore also offered in the 20 ml individual pack.

No, as the application solution is typically consumed less than the post-application solution, it is not available in an individual pack.

As long as it remains a liquid – meaning the liquid has not completely dried out – you may add a few drops of Aqua dest. (Ph. Eur.; pharmaceutical grade) to the bottle.

However, if the liquid has completely dried out, the post-application solution is no longer usable.

Important: Add only a few drops of Aqua dest. (Ph. Eur.; pharmaceutical grade), ensuring that a white, solid residue always remains in the bottle.

The application solution (blue cap) must under no circumstances be diluted with distilled water!

Keep the threads on the bottle neck and screw cap thoroughly clean and seal the bottle tightly.

For the 20 ml bottles, the use of the supplied dropper pipettes is recommended.

The application solution of Tiefenfluorid ® is optimized for use on dental enamel, contains a high fluoride ion concentration, and consequently has a low, acidic pH value.

The application solution of the Dentin Sealing Liquid is optimized for use in the cavity or on the crown stump.
To protect the pulp, the solution contains fewer fluoride ions (which are also only moderately effective due to limited saliva access).
Conversely, the copper doping is significantly increased.

Yes, Tiefenfluorid ® can be applied to patients of all age groups.

For patients with an elevated risk of allergic reactions, the conventional  Tiefenfluorid ®  formulation should be given preference.

from 26.00 €

Trial package 2 x 5 ml or
Economy bulk package 2 x 20 ml

  • Cervical Desensitization
  • Mineral Fissure Sealing (ZMK 1-2/1999)
  • White Spots Disappear (ZMK 9/1995)
  • Caries Prophylaxis, even in hard-to-reach areas
  • Your patient can eat and drink immediately!
Order now

Tiefenfluorid ® balance

Topical fluoridation for cervical desensitization, mineral fissure sealing, and caries prophylaxis.
The elevated pH value of the post-application solution balance neutralizes the mildly acidic and painful inflammatory milieu. Additionally, the copper doping of the post-application solution balance exhibits bactericidal properties.

Order here

Cervical desensitizationMineral fissure sealing (ZMK 1-2/1999)White spots disappear (ZMK 9/1995)Caries prophylaxis even in hard-to-reach areas

Application

For application, the tooth, ideally debrided of plaque, is isolated and thoroughly treated with an application solution-saturated cotton pellet or brush. Intermediate rinsing is not required. Drying is also unnecessary. Subsequently, a second cotton pellet or brush is used to meticulously apply the corresponding, well-agitated post-application solution. Only then should the area be rinsed with water. No drying or curing is necessary – the patient may resume eating and drinking immediately. An imperceptible precipitate will remain.

Cervical Desensitization: Repeat the treatment 1 to 2 times at intervals of 8 – 14 days, followed by 1 to 2 applications annually.

For cases involving particularly sensitive cervical areas, it is recommended to initiate the procedure with the application of the post-application solution. Subsequently, the application solution and then the post-application solution are to be applied again, as previously described.

Fissure Sealing: Following the standard pre-treatment of the fissure with a probe or an excavator, the application is performed. Ideally, the treatment should be repeated twice, with an interval of 8 – 14 days, followed by biennial applications.

Caries Prophylaxis: A minimum of one annual application is recommended; patients with orthodontic brackets should receive treatment at least twice annually.


Indication / Intended Use

Topical fluoridation for cervical desensitization, mineral fissure sealing, and caries prophylaxis. The elevated pH value of the post-application solution  balance neutralizes the mildly acidic and painful inflammatory milieu. Additionally, the copper doping of the post-application solution  balance exhibits bactericidal properties.

Ingredients

Application Solution: Magnesium hexafluorosilicate,  Copper(II) hexafluorosilicate, Sodium fluoride (as stabilizer),  Distilled water.
Post-Application Solution: Calcium hydroxide highly dispersed, Copper(II) sulfate, Calcium sulfate, Copper(II) hydroxide, Methylcellulose, Distilled water. 

Frequently Asked Questions

Is the post-application solution balance available for separate acquisition? Is the application solution balance available for separate acquisition? My post-application solution balance has partially desiccated; what remedial actions can be taken? How can the desiccation of the post-application solution balance be prevented? What are the distinguishing characteristics between Dentin Sealing Liquid and Tiefenfluorid® balance? What are the distinguishing characteristics between Tiefenfluorid® balance and the conventional Tiefenfluorid®? Can Tiefenfluorid® balance also be applied to pediatric patients?

Yes, as the post-application solution has a stronger wetting effect, it generally depletes faster and is therefore also offered in the 20 ml individual pack.

No, as the application solution is typically consumed less than the post-application solution, it is not available in an individual pack.

As long as it remains a liquid – meaning the liquid has not completely dried out – you may add a few drops of Aqua dest. (Ph. Eur.; pharmaceutical grade) to the bottle.

However, if the liquid has completely dried out, the post-application solution is no longer usable.

Important: Add only a few drops of Aqua dest. (Ph. Eur.; pharmaceutical grade), ensuring that a white, solid residue always remains in the bottle.

The application solution (blue cap) must under no circumstances be diluted with distilled water!

Keep the threads on the bottle neck and screw cap thoroughly clean and seal the bottle tightly.

For the 20 ml bottles, the use of the supplied dropper pipettes is recommended.

The application solution of Tiefenfluorid ® is optimized for use on dental enamel, contains a high fluoride ion concentration, and consequently has a low, acidic pH value.

The application solution of the Dentin Sealing Liquid is optimized for use in the cavity or on the crown stump.
To protect the pulp, the solution contains fewer fluoride ions (which are also only moderately effective due to limited saliva access).
Conversely, the copper doping is significantly increased.

The post-application solution of Tiefenfluorid ® balance incorporates a copper doping, in addition to the components found in conventional Tiefenfluorid ®, to enhance periodontitis treatment.

The application solution and the fluoride concentration are identical.

Yes, Tiefenfluorid ® balance can be applied to patients of all age groups.

In patients with an elevated risk of periodontitis, Tiefenfluorid ® balance should be given preference.

from 29.00 €

Trial Pack 2 x 5 ml
Bulk Pack 2 x 20 ml 

  • Combined Caries Prophylaxis and Periodontitis Protection
  • Shake, Apply, Done
  • Long-lasting Depot Effect
  • Mineral Sealing
  • Your patient can eat and drink immediately!
Order Now at a Special Price
WordPress Cookie Plugin by Real Cookie Banner